So last weekend, I decided to try a pattern of my own. Though it didn’t quite come out the way I envisioned, the overall concept did work out. The picture above is of a baby-sized hat.
I wanted to make a hat that combined a rib stitch and a garter stitch. I will probably make this again and write up more detailed instructions. Essentially, I used a 2×2 rib stitch and in the middle I used garter stitches. But somehow I got a little off, so I think it was more like k1, p1, k2, p1. Then I repeated the rib stitch pattern until I was ready to do a decrease.
When I was ready to start the decrease, I used a garter stitch and then I did the k2tog where you’re taking the loop off a peg and moving it to the left to knit 2 together so that you end up with a loop on every other peg. I kept decreasing until I could close the hat and then I stitched it up with my tapestry needle to make sure the top was secure and flipped the hat inside out (since the rib stitch and garter stitch are pretty much reversible).
I made the hat on the Knitting Board Loom Knitting Basics Loom, which is the small 7 inch loom with 32 pegs. You could similarly use the 10 inch KB loom, the KB All-in-One loom or one of the small KB hat looms. If you’re using a wide-gauge round loom, you could use two #4 worsted weight strands and make the baby/child-sized hat on a 24-peg loom or a 32-peg loom. You could also use a larger loom to make an adult-sized hat.
If you like this pattern, please let me know and I’ll re-make this and write up more detailed instructions for it. But it was nice to try out a different pattern and also to practice a new technique (this is my first hat using a k2tog decrease).
I used Red Heart Ombre Yarn in purple.